How To Make a Pumpkin Wine Holder for a Fall Party
Last year, I created this super cute wine server and it was so well liked, it went viral on Instagram!
I had so many comments and questions about it, so I want to show you how to make a pumpkin wine holder for a fall party.
When I say it went viral, I mean 4.6 million of you liked this idea!!
Can you believe all you need for this project is a foam pumpkin and something to cut it with??
It’s that easy!!
This post contains affiliate links which means if you purchase something, I make a small commission at no additional cost to you. Thank you for supporting my blog. You can read my full disclosure here.
First of all, let me share what I created for fall entertaining in 2023, that made me think of this idea.
I had a large foam pumpkin in my fall decor, and had this idea to cut the top off to create an ice bucket.
It was a simple project and such a cute addition to any fall gathering.
You can ice down a bottle of wine, water bottles, soft drinks, etc.
Pop over and see all of the steps to create this diy pumpkin ice bucket for your next fall party.
pumpkin wine dispenser inspiration
Last year, I decided to use the same type foam pumpkin and make a holder for a bag of wine.
I know a lot of wine drinkers aren’t fond of boxed wine, but it’s a perfect way to serve a lot of people and keep it budget friendly.
There are some other options for using this pumpkin wine bag holder, if you aren’t a wine drinker and refuse to serve boxed wine. I will share those ideas later in the post.
This faux pumpkin diy wine dispenser is my favorite fall serving DIY ever!
supplies for a diy pumpkin wine dispenser
13″ foam craft pumpkin
box cutter
sharp knife
beverage stand
directions for making a pumpkin box wine dispenser from a foam pumpkin
Using a box cutter, you want to score a line around the top of the pumpkin where you want to remove the top.
You will need an opening about 8″ wide.
Then, use a sharp knife to carefully cut completely through to remove the top.
Next, using the same method, cut a circle shape opening about 2″ in diameter close to the bottom of the pumpkin. This is where the spigot will come out.
Remove the bag of wine from the box, and gently place it inside the pumpkin.
You will need to carefully work from side to side placing the bag into the pumpkin so you don’t break the bag.
Next, pull the spout through the 2″ hole you have cut.
You may have to trim away a little if you haven’t cut an opening quite large enough for the spigot to fit all the way through.
photo credit: Farmhouse Living
Replace the top, place on a beverage stand to raise the spigot high enough to fit a glass underneath it.
And that’s it!
Now you have a super cute serving idea for a fall party.
You can use this same idea with a real pumpkin, but it is very messy.
The best part is, by using the foam pumpkin, you can save it to use from year to year.
Tip….
If you are serving white wine, you will want it to be chilled.
After you have placed your wine bag inside the foam pumpkin, you can add ice all around the bag to keep the wine chilled.
other ways to use a pumpkin drink dispenser
If you aren’t a wine drinker or you don’t want to serve boxed/bagged wine, the good news is you can order an empty bag with a spigot and fill with whatever drink you like.
You could certainly add your favorite bottle of wine, or you could mix up pumpkin apple cider sangria or a fun cocktail for a fall dinner party.
Wouldn’t it be so much fun to make up several of these pumpkin wine holders, add different wines and have a wine tasting party?
Or, how about making one of these for a tailgate party during fall football season?
A non-alcoholic punch for a shower or party is a great idea too.
And what about apple cider for a Halloween party or fall-themed party?
You can add a kid friendly drink, like lemonade or kool-aid.
This cute serving pumpkin would be a great option for serving water too.
It would be cute for a pumpkin carving party or Halloween party if you add a jack-o-lantern face on it.
You could use a sharpie marker and draw a face or cut shapes out of black adhesive and stick on.
I used a white pumpkin, but these faux foam craft pumpkins also come in orange, if you prefer that color choice.
I hope you enjoyed learning how to make a pumpkin wine holder for a fall party.
This easy pumpkin drink dispenser is perfect for your fall season gatherings and sure to be the talk of the party!
blessings and happy fall,
If you enjoyed this post, be sure and Pin It to remember it…
shop the post
Michele, that is ingenious. It is beautiful and who knew.🙂 from One box of wine drinker to another.”Cheers”. Thank you for sharing.
I am so glad you enjoyed the post and liked the idea! Happy fall Patricia!
Absolutely brilliant Michele!! I love this – and pairing it with the ice bucket too! Genius! Thanks for the creative and inspiring idea!
Oh good Barbara! I am so glad you liked the idea.Thanks so much!
This is so darn cute, Michele. Such a great idea. I’m sharing a link to your post in my weekly recap today. I think my readers will really love it too.
Happy Sunday!
Thanks so much Jen!! I’m so glad you like it.